Container Splicing

Country: United Arab Emirates

Product type: Container splicing

Use: Hospital

Building specifications: 66 20-ft containers + 19 16-ft containers

 

Building profile

1. This design sheet is made of PTH container, consisting of 66 20-foot boxes (6058x2438mm) + 19 16-foot (4876x2438mm), and a height of 2.591m. The indoor net height is 2.3m (the lowest point from indoor floor to indoor ceiling).

Load fortification:

Wind load: 0.30 KN / M2

Snow load: 0.00 KN / M2

Roof dead load: 0.20 KN / M2

Roof live load: 0.50 KN / M2

 

Material parameters:

Frame: The material of the main beam is Q345, the thickness of the material is 3mm, hot-dip galvanized, the thickness of the galvanized layer is 100μm, and the thickness of the spray paint is 100μm. The secondary beam is made of Q345. The whole frame is welded.

Roof panel: 70mmPU foam roof, 0.45mm color steel veneer on the upper panel (color steel plate is 100g / m2 + aluminized zinc and 20 / 5um finish) + 0.40mm color steel ceiling on the lower panel (color steel plate is aluminized zinc AZ50g / m2 + PE baking paint 15 / 5um).

Wall panel: 50㎜ thick EPS sandwich panel, double panel 0.450.4, EPS density 12㎏ / m3 (color steel plate is aluminized zinc AZ50g / m2 + PE baking paint 15 / 5um)

Floor cushion: 1.8mm PVC floor + 18mm cement fiber board. The location of the bathroom was changed to 2.5mm PVC floor + 18mm cement fiberboard.

Doors and windows: D1: 920x2080mm steel single door

D3: 840x2035mm steel single door

W1: 950x1100mm aluminum alloy single glass sliding window W2: 865x1100mm aluminum alloy single glass sliding window

W3: 400x400mm aluminum alloy single glass window

S1: 300x300mm PVC ventilation fan

Bath: Contains toilet, vertical wash basin, shower faucet, urinal, partition board, toilet water supply and drainage.

Electricity: The national standard of electricity, which only provides basic lighting electricity.